No. 2, Tianjin Road, Laoting Economic Development Zone, Tangshan City, Hebei Province
1. When the frame-type scaffold is erected with a height of ≤8m, the step size is ≤1.5m, and each layer of the façade is provided with vertical slanting bars. The overall bottom layer and the top layer of the frame should be vertical. To the slanting rod, and should be placed in the inner part of the frame every 5 spans from the bottom to the top and the horizontal and vertical slanting rods or large scissors struts with fastener steel pipe.
2. When the height of the frame of the full hall template bracket does not exceed 4 section poles, the top horizontal diagonal bar may not be provided; when the frame height exceeds 4 section poles, the top horizontal diagonal bar or fastener steel horizontal scissors shall be provided. support.
3, the buckle type scaffolding when the height of ≥ 8m full frame template bracket, vertical diagonal bar should be full set, the horizontal bar step ≤ 1.5m, along the height every 4 to 6 segments should be set horizontal The layered slanting rod or the fastener steel pipe is supported by a large scissors and should form a reliable tie with the surrounding structure. For a long strip-shaped independent high-profile formwork, the ratio H/B of the total height of the frame to the width of the frame should not exceed 3.